Electronic ballast Lumatek PRO 600W, 400V - CONTROLLABLE

Digital high-frequency ballast Lumatek PRO 600W Controllable , 400V with IEC connector and with four-position regulation of light output in the range of 400W-440W-600W-660W . This ballast also has the option of connecting a Lumatek Digital Panel-Controller .

Thanks to the Digital Panel, you can monitor the temperature in the room, time the lights, use advanced dimming and lighting functions, and safety modes that automatically turn off or dim the power of the ballast in case of overheating of the growing space.

It is intended for connecting high-pressure sodium (HPS) and metal halide (MH) lamps. It will also light up others, but the most suitable and effective discharge lamp is the Lumatek 600W/400V , which is included in the package. The Lumatek Ultimate Pro automatically detects a connected lamp and then powers that light.

Compared to classic ballasts, it produces less heat, is significantly quieter , lighter , completely vibration-free and extends the life of the discharge lamps. The saving lies in the fact that it needs less power to perform. It gets up to 10% higher PAR values from discharge lamps than conventional ballasts. Thanks to the high frequency , the discharge lamps do not flicker.

Before starting the light regulation of the Lumatek 600W PRO Controllable ballast, let the discharge lamp warm up for at least 10 minutes in normal operation.

The operation of Lumatek digital ballasts has no disturbing effect on short-wave receivers - telephone, radio, TV. Another advantage is its easy operation and handling , excellent performance, internal protection against the detection RF signal.

The Lumatek Ballast allows powering both classic 240V and 400V discharge lamps.

5-year warranty!

Technical data of Lumatek 600W PRO Controllale ballast:

• Dimensions: 310x114x81mm
• Weight: 3kg
• Power: 400W-440W-600W-660W
• Power consumption: 630W
• Frequency: 120Khz
• Voltage: 240V 50/60Hz
• Current: 2.7A
• Optimum ambient operating temperature: -25 to +40 degrees Celsius
• Optimum ambient operating humidity: 0% - 90%

Keep in mind that you can only regulate the light output with dimmable lamps. A 250W discharge lamp can never be turned on to 400W or more! Please read and follow the instructions carefully before installation. Always protect electrical equipment from water, impacts and unprofessional interventions. It is forbidden to handle the cover and the inside of the ballast or the discharge lamp when they are connected to the network.

You lose your right to warranty due to damage. Lumatek ballasts are designed for flawless operation in temperatures from -25° to +40° and humidity up to 90%. Do not use any damaged discharge lamps.