Fan KSA 200 U, 850m3/h

Metal radial fan Vents KSA 200 U with heat and sound insulation cover, ball bearings and thermostat.

The KSA duct fan will find its application in medium and large rooms with low noise requirements, such as kitchens, halls, warehouses, offices, greenhouses, nurseries and wherever we require high performance with minimal noise. Thanks to its technical parameters, it is intended for suction in pipelines at medium and longer distances.

The fan cover is made of galvanized aluminum. The heat and sound insulation layer is made of polystyrene foam.

A two-pole motor with an external rotor drives the galvanized steel impeller. The motor is equipped with ball bearings for longer life and mounting in any position. The motor is equipped with a thermal fuse. For precise and safe operation with low noise, each and every impeller is dynamically balanced.

Motor protection is IPX4. Ball bearings extend the life of the fan to 40,000 hours. This fan is 30% quieter than fans of the same diameter.

Thermostat: if the temperature rises by 2 °C above the set temperature on the thermostat, the fan will automatically switch to a higher speed. After reaching the set temperature on the thermostat, the fan automatically switches to a lower speed and continues exhausting.

Technical specifications:

- power supply: 230V 50Hz

- power consumption: 110W

- rated current: 0.45A

- air flow: 850m3/h

- revolutions: 1300/min

- static pressure: 280Pa

- acoustic pressure: 28dB/3m

- temperature max: 40°C

- weight: 9.30 kg

- protection: IPX4

- flange diameter: 200mm

- ball bearings: yes

- automatic blind: no

- integrated speed and temperature regulation