Fan with thermostat Vents/Dalap 100 UT, 145/187m3/h

The smaller plastic fan TT 100 U has a maximum output of 145/187m3/ha and is intended for ventilation ducts with a diameter of 100 millimeters. The main advantage of this Vents fan is the electronic temperature sensor , which ensures automatic speed regulation depending on the air temperature in the surroundings or in the pipeline.

When the temperature rises 2 degrees above the set temperature, the fan switches to a higher speed. After lowering the temperature, it will return.

Main features and parameters:

• single-phase motor with thermostat and ball bearing
• lifetime up to 40,000 hours
• cover made of highly resistant ABS plastic
• semi-radial plastic vanes
• motor overheating protection
• enables connection at any angle and anywhere in the pipe system
• maximum air capacity (output) 145/187m3/h
• consumption (power) 21/33W
• 2450/2500 revolutions per minute
• pressure 120/135Pa
• sound pressure level 28/35dbA
• compatible with round pipes with a diameter of 100 mm
• weight 1.4 kg protection IP X4
• max operating temperature 60 degrees
• into pipes with a maximum length of 17 m

Why is a duct fan with a thermostat an advantage?

The fans of the TT U series are equipped with a thermostat and thus enable automatic speed regulation according to the ambient temperature . It is suitable for the operation of systems that work with high pressure and require minimal noise. Their versatility enables use in all small spaces that require frequent or continuous air exchange (offices, kitchens, bathrooms, greenhouses, workshops or growing areas).

On the plastic body of the fan there is a mounting plate for fixing to the wall . An adjustable timer can be added to the model. Detailed instructions for connection and use can be found in the Czech manual.