Fan with thermostat Vents/Dalap 315 UT, 1760/2350m3/h

The professional pipe fan with thermostat TT 315 PRO U, 1760/2350m3//h is compatible with a ventilation pipe with a diameter of 315 millimeters. TT fans combine quality parameters and wide options of axial and radial fans. In addition, the TT PRO series has higher performance and extended functions.

Properties:

• two-speed motor with ball bearings and a lifetime of up to 40,000 hours
• built-in thermostat and the option of automatic power regulation according to temperature
• over-standard function delayed start/interval operation/coasting
• cover made of high-quality fire-resistant propylene
• semi-radial blades made of plastic
• practical clamps with locks ensure easy disassembly and maintenance
• the motor is protected against overheating by a thermal fuse
• can be connected anywhere in the pipeline system, both horizontally and vertically
• not subject to corrosion
• maximum air capacity (output) 1760/2350m3/h
• consumption (power) 225/330W
• pressure 455/660Pa
• 1980/2660 rpm
• sound pressure level 47/55dbA
• compatible with round pipes with a diameter of 315 mm
• weight 11.4 kg
• protection IP X4
• max operating temperature 60 degrees
• into pipes with a maximum length of 60 meters

Why are TT PRO fans professional?

The plastic pipe fan TT PRO 200 U with thermostat is designed for ventilation systems that work with high pressure and require minimal noise . The main advantage of this duct fan is the body made of fire-resistant propylene , higher power and more functions - delayed start , interval operation or coasting .

Vents TT PRO fans are intended for ventilating all spaces that require constant air exchange (workshops, shops, offices, living spaces, bathrooms, greenhouses or growing areas, etc.). The fan's plastic body has a mounting plate for wall and ceiling mounting . It is not subject to corrosion and can be used even in damp places .

An electronic temperature sensor that ensures automatic speed regulation depending on the air temperature in the surroundings or in the pipeline. When the temperature rises 2 degrees above the set temperature, the fan switches to a higher speed. After lowering the temperature, it will return. Detailed instructions can be found in the Czech manual.