Fan with thermostat VK/DALAP 125 U, 355m3/h

Plastic pipe fan with thermostat VK 125 U, 355m3/h is intended for ventilation of smaller non-residential spaces . The maintenance-free fan made of ABS plastic impresses with its low weight , quiet operation and long service life . The built-in thermostat will simplify the ventilation of your rooms.

You set the desired temperature manually directly on the fan . If the temperature rises by 2 degrees, the engine will start working faster. When the room cools down, it switches back to a lower speed.

Advantages of the fan VK 125 U, 355m3/h:

• an ideal choice for extracting air from areas with ducts with a higher pressure drop
• with a built-in thermostat for temperature regulation
• usable for ventilating garages, workshops, shops, growing rooms, offices, etc.
• maintenance-free ball bearing guarantees reliable and quiet motor performance
• single-phase asynchronous external rotor AC motor
• reliable ABS plastic is not subject to corrosion and enables operation in wet areas
• wall or ceiling mounting at any angle
• radial blades , low noise

Parameters:

• into flexible and rigid pipes with a diameter of 125 mm
• max. air capacity (output) 355m3/h
• consumption (power) 79W
• pressure 335Pa
• 2800 revolutions per minute
• sound pressure 46dbA
• weight 2.2 kg
• optimum operating temperature -25/+55 degrees
• motor overheating protection
• operation up to 40,000 hours and more
• recommended for shorter pipes with a maximum length of 10m
• protection IP X4

We supply the Vents VK 125 U quiet radial fan with thermostat and 355m3/h output including fasteners. The speed can only be regulated using an external regulator (thyristor or autotransdormer).

When installing, starting and handling the fan, follow the Czech instructions included in the package. Connect and install exactly according to the manual and the attached diagram.