Lumatek VF120W LED system

The Lumatek VF90W LED system was specially developed for plants with a need for lower lighting intensity on an area of 120x50 cm . It contains 4 LED strips with an input of 30W and an efficiency of 2.4 , which generate a lighting intensity of up to 244 qmol/s . The system is an ideal solution for the illumination of mother plants, the propagation of clones, seedlings or the cultivation of plants requiring lower light intensity. The special construction also offers the possibility of growing in layers.

Protective elements of the latest generation of Lumatek

The VF range already includes the new Clear Glue diode protection technology on the LED strips. It therefore offers a higher light transmittance of over 99%, extended diode life, increased corrosion resistance and high IP65 waterproofing. For basic maintenance, simply clean the slats with a damp cotton cloth.

Easy connection and control of multiple systems

LED systems of the VF series are already adapted from the factory for simple interconnection. The system is powered and controlled using a special Lumatek driver 650W external ballast, which is not part of the system and must be purchased . You can connect up to 5 Lumatek VF120W to one of these ballasts. Lumatek Digital Panel Plus 2.0 offers advanced functions such as regulation by 1%, control of several ballasts at once and simulation of sunrise and sunset.

Specifications:

● Efficiency: 2.4 µmol / J
● PPF: 308 umol / s
● Input voltage: 220-240 V, 50-60 Hz
● Power consumption: 130 W
● Optimum illumination area: 120 x 50 cm
● Degree of protection: IP65
● Lifespan: >60,000 hours
● Light distribution: 120 °
● Light source: highly efficient White and Warm White diodes
● Dimmable: 25%-50%-75%-100% - with a controller connected to the main
driver
● Ballast: 650W (sold separately), up to 5x VF120W can be connected
● External control: With Lumatek Digital Panel Plus 2.0
● Weight: 2.1 Kg
● Dimensions: 1207x521x20.5mm
● Spectrum: Full Spectrum F

Package contents:

- 1x VF120W LED system

FAQ

Is the Lumatek VF 120W LED system suitable for the entire growing cycle?

Rather not. The Lumatek VF 120W LED system is specially designed for plants with
the need for lower lighting intensity. If your plants are more demanding on quantity
PAR such as hemp (CBD), use the system for the vegetative phase at the most.

On which surface should I use the Lumatek VF 120W LED system?

Due to the low intensity of the light, the system is suitable for illuminating plants located directly below it.
Light scattering caused by greater distance from plants would already reduce PPFD and plant development too much
would not be effective.

Specifications:

● Efficiency: 2.4 µmol / J
● PPF: 308 umol / s
● Input voltage: 220-240 V, 50-60 Hz
● Power consumption: 130 W
● Optimum illumination area: 120 x 50 cm
● Degree of protection: IP65
● Lifespan: >60,000 hours
● Light distribution: 120 °
● Light source: highly efficient White and Warm White diodes
● Dimmable: 25%-50%-75%-100% - with a controller connected to the main
driver
● Ballast: 650W (sold separately), up to 5x VF120W can be connected
● External control: With Lumatek Digital Panel Plus 2.0
● Weight: 2.1 Kg
● Dimensions: 1207x521x20.5mm
● Spectrum: Full Spectrum F