Effectively increase the production of resin and terpenes

Sunpro 3chom Bar UV A+B 30W naturally stimulates the defense mechanism of plants by increasing the proportion of UV radiation in the light spectrum. Their reaction is to increase the production of resin , which protects their skin against UV radiation, similar to how human skin produces pigment (tan).

Plants grown in high mountain areas, where there is a naturally higher proportion of UV radiation, contain demonstrably higher concentrations of active substances and terpenes . Even in the case of CBD varieties, the guaranteed limit for the concentration of active substances is exceeded up to three times in such locations.

Sunpro 3chom Bar UV A+B 30W was specially developed to simulate these conditions in an indoor environment and intensively stimulate resin production in the last
flower phase. Sunpro 3chom Bar UV A+B 30W will help you get the most out of your plants .

Faster rooting and stronger plant structure

Sunpro 3chom Bar UV A+B 30W can also be used to support rooting, create a stronger plant structure (stems, leaves) and suppress pulling in the first phase of flowering after
switching. This effect is even more pronounced if you use sodium discharge lamps as the main source of illumination.

Suppresses fungi and bacteria in the critical flowering phase

Sunpro 3chom Bar UV A+B 30W generates a combination of UV-A and UV-B radiation. In the case of UV-B, the ability to suppress bacteria and fungi has already been demonstrated
organisms. The use of Sunpro 3chom Bar UV A+B 30W in the last, most critical phase of flowering thus also works as a prevention against the spread of fungi on plants.

Technical parameters:
● Efficiency: 2.9 qmol/J
● Color rendering index (Ra): 90
● Service life: 50,000 h
● PPFD: 86 qmol/s
● Chip wavelength: 390nm+310nm LED
● Input voltage: AC100-277V
● Construction material: Aluminum
● IP rating: IP55
● Power consumption: 30W
● Light source: LED
● Dimensions: 58x5.5x5.3 cm
● Weight: 1.36 kg
● spectrum: UVA + UVB
● certification: RoHS
● Regulation: smooth 0 - 100%

FAQ

How many watts of Sunpro 3chom Bar UV A+B do I need for my lighting?

Add Sunpro 3chom Bar UV A+B to your main light source at a ratio of approximately 1:10. (example: main source 300W + 30W UV)

Technical parameters:
● Efficiency: 2.9 qmol/J
● Color rendering index (Ra): 90
● Service life: 50,000 h
● PPFD: 86 qmol/s
● Chip wavelength: 390nm+310nm LED
● Input voltage: AC100-277V
● Construction material: Aluminum
● IP rating: IP55
● Power consumption: 30W
● Light source: LED
● Dimensions: 58x5.5x5.3 cm
● Weight: 1.36 kg
● spectrum: UVA + UVB
● certification: RoHS
● Regulation: smooth 0 - 100%