SunPro KILO+ Complete Fixture 1000W HPS DE, 230V

The powerful super modern light consists of an integrated high-frequency (>80 kHz) ballast , a double-ended SunPro Super Bloom 1000W HPS/230V discharge lamp with top parameters and an effective spectrum.

The novelty is a spirit level for precise mounting of the light, the possibility of connection and control via the Sunpro Light Controller + a control LED located directly on the ballast!
The package does not include a connecting data cable between the light fixture and the Light Controller.

The Sun ProKILO+ Complete Fixture 1000W lamp set also includes a built-in freely adjustable VEGA Green shade with a reflectivity of up to 95%. Position regulation of discharge lamp power in the range 600-660-750-825-1000W. The built-in ballast has protection against overheating and short circuit.

Important advantages of the complete fixture in connection with the DE discharge lamp are also an extended lifetime , optimal light distribution with illumination of an area of up to 2 m2 and a stable light flux.

Complete lamp SunPro Complete Fixture 1000W HPS DE, light for professionals . A new feature is the ability to control lighting , dimming or switching on while using all the functions of the modern Sunpro Light Controller.

The SUNPRO 1000W DE Complete Fixture uses advanced frequency technology and a high-power 1000W sodium discharge lamp, providing high efficiency and the highest PAR values in the industry. Dimmable 600W-1150W .

SUNPRO digital ballasts use a timed re-failure system that prevents the load from "re-starting" the hot discharge after a power failure. If a high lamp temperature is detected, the lamp restart will be delayed for 60 seconds until the lamp cools down enough to be restarted safely.

The SUNPRO digital ballast automatically adjusts the output frequency to maintain a constant output regardless of input power fluctuations and lamp aging.

The SUNPRO digital ballast is up to 30% more efficient than a standard magnetic ballast and produces more lumens of light per watt of energy consumed. The efficiency does not decrease and is maintained throughout the lifetime of the unit.

The SUNPRO digital ballast is suitable for use with all quality HPS, Metal Halide and Ceramic Metal Halide bulbs . For the best result, we recommend always combining with SUNPRO brand discharge lamps, it has no noisy internal fans and the operation is completely silent!

ATTENTION: before connecting, carefully study the correct snapping of the discharge lamp into the sockets of the lamp!

• The DE lamp should be horizontal, not vertical.
• One end must sit on top of the socket spring while the other lies in front of them.
• Never bend the wires (discharge lamp wire!)
• You can now gently push the pinch area at the top of the silver sleeve springs until the lamp is securely in place.
• Don't push too hard! Chips or cracks may damage the lamp.
• Push each part of the discharge lamp in until it clicks completely into place.
• Once the socket is properly closed, no gap should be visible.