SunPro SUNFATHER 465W is the latest LED lighting with the possibility of adjusting the light spectrum for different types of plants and their different cycles.
You can set the spectrum either directly on the device or using the SunPro OneTouch digital smart touch controller .
Features and benefits:
Digital control system:
The device works with a touch digital controller. When you connect the dimmer to EXT mode, the device is only ready for use. (If you connect the lighting together and want to use the controller - you need to switch to EXT mode).
Adjustable LED light spectrum:
SUNFATHER darkens naturally and can imitate up to 4 individual light spectrums for different phases of the plant and brings a part of mother nature into your indoor environment and at the same time gets rid of possible problems in a non-static and unstable natural outdoor environment
Technical specifications SUNFATHER 465W:
Nabízíme pouze prověřené produkty od světových značek. | SunPro kvalitní výbojky za super cenu. |
Výrobce | SunPro |
SunPro SUNFATHER 465W 3.1 UV LED consists of 6 full spectrum LED bars and 2 special UV bars that ensure perfect temperature regulation and perfect distribution of light on the growing area. Unlike "point" light sources (discharge lamps, quantum boards), the SUNFATHER design offers a consistent high PPFD with minimal loss of intensity towards the edges of the space. That way, all your plants will get a similar amount
lights and none will fall behind.
Sunpro SUNFATHER 465W generates a lighting intensity of up to 1442 qmol/s PPF . This efficiency is sufficient for growing plants on an area of 120x120 cm and also allows the use of CO2 with a significant increase in yield.
Sunpro SUNFATHER 465W is completely assembled and immediately ready for connection after unpacking from the box .
SunPro SUNFATHER 465W 3.1 UV LED has the function of adjusting individual parts of the spectrum and offers perfect lighting conditions for every phase of plant development. Settings can be made using the control elements on the construction of the LED panel or through the digital controller of the SunPro OneTouch Controller .
Vegetative phase (Full spectrum with an increased share of the blue spectrum)
- Creation of more chlorophyll, supporting the construction of strong stems and large leaves
Early bloom (Full spectrum with an increased proportion of red and Far Red spectrum)
- Faster flowering, more flowers, more efficient flowering and higher yield
Late bloom (Full spectrum with an increased proportion of red, Far Red and UV spectrum)
- Added UV for the last two weeks of flowering stimulates resin and terpene production
Of course, the SunPro SUNFATHER 465W has an IP65 degree of protection, which ensures reliable resistance of the LED system against dust and jet water. In combination with a lifespan of over 50,000 hours and a minimal loss of efficiency of max 10%, it offers a long life of up to 10 years without the need for replacement.
SunPro SUNFATHER 465W offers spot power regulation (40 - 60 - 80 - 100%) directly on the system design. It thus enables a gradual increase in lighting intensity according to the current phase of plant development, which saves even more electrical energy.
Connection to the automatic control system SunPro LED One Touch Master Controller V2 or SunPro LED Master Light Controller offers other advanced functions such as a timer, simulation of sunset / sunrise, regulation of lighting according to temperature or humidity and the possibility of controlling up to 160 lights.
Technical parameters:
● Efficiency: 3.1 umol/J
● Number of LED bars: 6 (FS) + 2 (UV)
● PPF: 1442 umol/s
● Suitable for space: 120x120
● Input voltage. 120-277V
● Cooling: passive
● Lifespan: up to 50,000+ hours
● CRI: 80ra
● Dimensions: 106.7x110.5x5.4cm
● Weight: 11.6 kg
● Power regulation: 40 - 60 - 80 - 100%
Adjusting the spectrum is done simply by using two control elements on the construction of the LED panel. With one, you switch between the enhanced blue spectrum ( for the growth phase ) and the enhanced red + Far Red spectrum ( for the flowering phase ). The second button is only for adding UV radiation, which is most often used for the last 2 weeks of flowering to promote resin production .
The Lumatek ZEUS 465W PRO 2.9 LED system perfectly covers a growing area of up to 120x120 cm. If you prefer to shape larger bushes, you will be happiest with 9 plants. Choose plant 16 for faster harvest and less work.
Technical parameters:
● Efficiency: 3.1 umol/J
● Number of LED bars: 6 (FS) + 2 (UV)
● PPF: 1442 umol/s
● Suitable for space: 120x120
● Input voltage. 120-277V
● Cooling: passive
● Lifespan: up to 50,000+ hours
● CRI: 80ra
● Dimensions: 106.7x110.5x5.4cm
● Weight: 11.6 kg
● Power regulation: 40 - 60 - 80 - 100%
This online shop stores cookies to help it function properly. By using our services you agree to their use.