Trolmaster Dual Condition Adapter, adapter for alternating mode devices

Pre-orders only - In stock within 7 days!

Adapter for conditional switching for switching mode el. of need (DCC-1)

The TrolMaster DCC-1 programmable module provides a simple solution for controlling the device after setting more than one switching condition.

For example, if the temperature or humidity is too high, it is necessary to turn on the exhaust fans, but at the same time turn off the CO2 device. There are many other examples where conditional switching can be applied, many conditions that can be combined or split.

The DCC-1 is designed to be used in combination with one of the TrolMaster plug-ins (DSC-1, DSH-1/2, DST-1/2 and DSP-1). After connecting the plug-in module and DCC-1 with an RJ12 cable, the DCC-1 will act in concert with this plug-in module to control any connected device.

The DCC-1 can also be set in two different ways using the "Interlock" function.
INTERLOCK OFF: DCC-1 is blocked and the conditions applied to the connected modules are in EITHER (OR) mode - switching according to the first or second condition individually. (modules used "in parallel")

Example: The exhaust fan will start if the temperature OR the humidity is too high. The exhaust fan will start at night with a timer OR if the humidity is too high

INTERLOCK ON: DCC-1 is activated and the conditions applied to the connected modules are in BOTH mode - switching according to the first and second conditions at the same time. (modules used in "series")

Examples: The exhaust fan will start and the CO2 device will turn off AT THE SAME TIME. If the temperature exceeds the critical level, the exhaust fan will start at 100% power and the lighting will turn off AT THE SAME TIME.

• LED voltage indicator
• Button for immediate connection to the control unit via RJ12
• Plug & Play system - immediate cooperation after connection

Package contents:

• 1x Adapter for conditional switching for switching mode el. of need (DCC-1)